HOW TO SAFEGUARD YOUR GARAGE FROM EXTREME TEMPERATURES

Does your garage double as a laundry room, den, game room, workshop, or office? When your garage exists for more than just storing your automobile, then it’s essential to have an insulated garage door. When your garage is properly insulated, you’ll achieve maximized thermal efficiency with optimized air infiltration reduction. Regardless of what the weather is outside, a well-insulated garage using the right sealant provides you with a functional garage space all year round, making you comfortable and giving you the highest level of efficiency. You’ll benefit from considerable energy savings. You’ll keep as much heat out as possible in summer, and as much cold out as possible in winter.

 

Garage door sealant is for protecting against snow, moisture, and colder weather in general. Dry rot can also be a culprit. Often the bottom weather seal is the one you’ll have to replace. There are many different sizes, so you’ll need an inspection to figure out the correct type for your garage door. The vinyl top and side seals also break down over time. These come in various colors to match whatever sort of garage door you have.

 

If you see any damage, feel any air leaking in, or light coming through any place, then it’s time to get new garage door sealants ~ also referred to as weather seals or weatherstripping ~ they are obviously for applying to the garage door’s four edges. To be most effective, they must perfectly fit your particular garage door.

 

Not only do weather seals guard your garage door from temperature extremes, they also keep out small creatures as well as insects. If there are any gaps on the garage door, vermin or even neighborhood pets are able to sneak inside your garage, and some may not be able to get out. Prevent this scenario from happening with superior-quality bottom weather seals. Various kinds include: T-shape, P-shape, bulb shape, and triple contact. You’ll also stop dust and fumes from entering. Brush seals have bristles, which significantly help reduce dust particles from staying on your garage door. To prevent water from coming in whenever it rains, make sure there are not any gaps at the bottom of the garage door. Stop cold air and moisture from penetrating the garage with a top-of-the-line garage door weather seal. An ideal sealant is the threshold seal, made of hard rubber. The optimal weather sealant for your property will also be a successful barrier both to keep out debris and to continuously maintain a smooth garage door pathway.

 

There are so many different choices, depending upon the garage’s uses; your property in general; the garage door itself; and your budget, taste, and particular requirements. For most people, insulating the garage yourself is an overwhelming task to anticipate. If it’s too intimidating for you, hire a professional to do the installation for you. If you’re anywhere in Union City, Georgia, find a reputable staff mobile expert at a trustworthy garage door company, such as the aptly named Garage Door Masters.

 

 

Protection in Hot Weather

 

During summer, the major goal is to enhance the airflow in your garage. Consider taking these measures:

 

Wall insulation efficiently keeps out the summer heat. Paneling or wallboard should be used to encapsulate the material. You’ll prevent toddlers, teenagers, and pets from tearing things out.

 

Insulate the garage overhead door. For a metal garage door, add a layer of rigid insulation two inches thick, attached to each panel’s inside using contact cement. Or, an insulated sectional overhead door is a viable alternative.

 

Insulate the ceiling of the garage. With paper-backed batt insulation, ceiling wallboard isn’t needed. Install the insulation using staples, paper side down, or keep it anchored with netting. You can also use staples to secure the netting. Experts recommend that you do both.

 

Plant a tree close by. A deciduous or hardwood tree is an economical and aesthetic way to cool down the garage. (It keeps your garage warm during winter, also.) Plant your tree between the position of the sun during the hottest part of the day and the garage. The leaves will provide shade. (And, during winter, the bare branches will permit the sunlight to shine through, supplying the warmth you need.)

 

An adjustable rollaway awning attached to the sunny side of your garage will create shade cooling things off.

 

A stationary vent on the roof is an inexpensive way to make an exit point for hot air trapped inside the garage attic. Or, if you can afford it, install a mechanical exhaust system, in which fans will draw cooler air from the garage into the attic. You’ll cool the attic as well as the space below.

 

Protection in Cold Weather

 

Even if the temperature drops below freezing, if you have winterized your garage, you’ll save a lot of money and time.

 

Insulate your garage. If your garage gets too cold, it can damage not only your vehicle, but also anything you store there. Do you keep the washer and dryer in your garage? If you have a washing machine with water left in the lines or the pump, it can freeze and crack. The same risk is possible with your car’s fuel gels, which can freeze inside the engine. Another possibility is that paint can separate and get ruined during prolonged periods of freezing temperatures.

 

Insulate the garage door. A variety of products is available to you for garage door insulation, including a kit designed for the purpose. The options for effective insulation include reflective barriers, foam board, and fiberglass batt insulation. Whatever you choose, first you’ll have to cut the insulation to fill the garage door panels. Fasten them with adhesive and be sure each stays firmly in place. The whole project will be easier if your garage door isn’t the kind that has recessed panels.

 

Insulate the garage walls. Proper garage insulation installation requires that you study the installation guide carefully so you can be sure you select the insulation thickness that’s appropriate for your garage’s walls. Some common mistakes people make are: cutting the batt insulation too short or too long for the location, not fastening it securely, or not supporting it correctly. Bear in mind that insulation has to fit snugly; however, don’t jam it in too tightly.

Article source here: HOW TO SAFEGUARD YOUR GARAGE FROM EXTREME TEMPERATURES

Garage Door Masters: Garage Door Spring System vs. Pulley System

Union City Track Repair

If you are in Union City, GA and have questions about spring systems versus pulley systems, be sure to reach out to Garage Door Masters. There are so many different parts and terminology when it comes to how a garage door operates that it can become quite confusing. To put it briefly, extension springs count on a system that consists of garage door pulleys and cables to do their job, which is to safely open the garage door and of course to close it. This is the most basic information to consider if you are curious about springs and pulleys. But here, we will go into more detail so you have a better idea of how all of the parts work. It is good to know how your garage door works – this way, if something goes wrong, you will have a better idea of how to fix it. In addition, you might want to know more about actual pulley systems – this is something that some homeowners attempt to build on their own, and there is sometimes confusion when looking for pulley parts versus systems.

Check it out!

“Garage door springs” is a term that usually refers to extension springs or torsion springs. If you know anything about springs, you might know that they are connected to a lot of tension – they have to support a great deal of weight. Basically, your garage door is very heavy, weighing hundreds of pounds quite often – and the springs have to be able to support it. Therefore, they have to be in good shape, all of the time.
All parts work together in sync so that you can enjoy a garage door that stays in place, and opens and closes safely and smoothly. Some parts are more dangerous than others, however, if they break. Springs are critical to overall functioning.

Pulley System

If you do a search online, you can find videos on how to create a garage pulley storage system. You can find information on how to hang certain items from your garage ceiling. Let’s just say, things can get confusing if you are just trying to figure out how different components work. If you search on Google, you will find that Amazon has different options, like garage “gators” and platforms, as well as hoists. You will find parts that are meant to build a DIY pulley system. So, why would one want to create a pulley system, anyway? This is something that many homeowners toy around with because they need more garage space. Let’s face it – nowadays, people tend to acquire a lot of items, and space is limited. Unless you have a mansion that you live in, a shed to store all of your tools, a garage to store your cars, and then an extra storage unit, you likely will find yourself running out of space. Even if you do have all of these things, this is still often times the case! You can utilize the convenience of a pulley system to attach a platform to the ceiling of your garage, which will thereby create more storage space for you. Best of all, this storage space will not be in the way – it won’t take up any additional room in the garage. If you consider yourself a very handy person who has experience with DIY projects, then you might attempt to build your own pulley system. This will entail using lumber, a storage platform, 2 by 4s, wood screws, plywood and more. If you aren’t comfortable working with all of these different materials, then your best bet is to hire a professional service or contractor.

Garage Door Spring System

Spring systems can consist of the following terms: extension springs, tension springs, torsion springs, EZ set springs and more. When talking about spring systems, the reference is typically to any springs that make the garage door operate. The springs tend to be located either above the opening of the garage door or sometimes at the ends of the tracks. It all merely depends on the types of springs that your garage door is using. If you’re going to install a pulley system for storage, then you want to know how to work with springs, and you will want to know how important it is to cautiously work with them. For this reason, people often times turn to an expert when they have questions about pulley systems versus spring systems.

Garage Door Rollup Gates Services

If you pull up spring systems online, you’re going to find terminology such as single Ez-set torsion spring replacement, OEM torsion springs, extension springs, Wayne Dalton torquemaster garage door spring, and more. This can make finding what you are looking for confusing, which is why it is always recommended that you speak directly to an expert. Most will offer a free consultation over the phone, allowing you to get all of the information that you are looking for, without any pressure to make a purchase or schedule a service.

Hopefully you have a better idea of how pulleys and springs work to make your garage door function smoothly – and it is our hope that you understand why people build pulley systems for their garage space. It is always a wise idea to turn to an expert when you are dealing with parts that you aren’t very familiar with. It is always best to leave certain things in the hands of experts who understand what they are doing, and who are licensed and insured to ensure your property is protected.
Thanks for checking out more information about spring systems and pulley systems. Remember to call Garage Door Masters in Union City, Georgia if you happen to be in the area and have any questions. Located elsewhere? Do a search through Google and pull up garage door repair and service companies in your city. You are sure to find a lot of options.